Current position > Contact Us
The compact hot wire anemometer testo 425 with telescopic probe is ideal for simple, fast and precise determination of flow velocity and volume flow in ventilation ducts of air conditioning and ventilation syst
Diameter 10mm probe: Diameter 20 x 3mm (Steel) Diameter 6mm probe: Diameter 12 x 2mm (Steel) *Auto calibration to assure the accuracy *Auto linear compensation: this advanced software program enhances the precision by correcting the non-linear accuracy of transducer. ...
The testo 405i Smart Probe is a wireless instrument for measuring air flow velocity, temperature, and volume flow. It is equipped with a telescopic shaft, which extends to 15” for easy in-duct testing. You can reliably determine timed and mul
Sonin LED Moisture Test Tool 50210 - DIY Moisture Probe Great for cleaners, inspectors, contractors, adjusters and homeowners to find out if excess moisture is present. Press the metal contact into surface to determine extent of moisture problem. The more lights on, the higher the moisture level...
Hot Wire Anemometers In the place of an X-wire probe or 3-sensor probe, a single sensor hot wire probe may be used in a two-dimensional and three-dimensional flow respectively. In two-dimensional flows, to determine the magnitude of the mean velocity vectorC, the yaw angleqand pitch ang...
This anemometer boasts remarkable flexibility with a suite of eight different probe types, each meticulously designed for specific environments. Whether it’s measuring temperature, humidity, turbulent or high-velocity airflow, or in confined spaces like circuit board cooling profiles, these probes are ...
(APEs). Three parameters, wind speed bias, wind direction bias, and turbulence intensity were selected to evaluate the effective range of the anemometer. The indicative wind direction range of the ship anemometer for flight operation can be determined by comparing the results of wind tunnel ...
hot-wire anemometers, and integrating grids may also be used to measure flow rate in the dilution tunnel [ 16 , 24 ]. Unlike the other methods, EN16510:2022 does not calculate the total pollutant mass emitted (see Section 2.5 ), and therefore does not require flow rate measurements to ...
