Current position > Product detail
『Flow Meter Drawing Symbol Blueprint: Reading P&ID Schematics for Plant Instrumentation』Related information(v cone flow meter|rotary gas meter|gallon meter|gear meter|metal tube rotameter|glass tube rotameter|nutating disk meter|transit time ultrasonic flow meter|wedge flow meter|pd meters|hydraulic flow meter|ultrasonic water flow meter|water flow meter|air flow meter|magnetic water flow meter|oxygen flow meter|gas flow meter|argon flow meter|air velocity meter|gasoline flow meter|fuel flow meter|ultrasonic water meter|digital water meter|nitrogen flow meter|solid flow meter|Oxygen tank flow meter|digital water flow meter|diesel fuel flow meter|steam flow meter|02 flow meter|compressed air flow meter|oil flow meter|liquid flow meter)
Flow Meter Drawing Symbol Blueprint: Reading P&ID Schematics for Plant Instrumentation
Quick Answer
Flow meter drawing symbols on a P&ID are not simple icons.
They tell you the meter type, installation point, signal output, and whether the instrument reports to a PLC or DCS.
After you read the bubble and tag number you can send us the process data for a fast flow meter quote.
Why P&ID Flow Meter Symbols Matter in Plant Projects
An EPC or plant engineer reads a P&ID before any purchase order gets written.
The symbol shows if the meter is a Coriolis, electromagnetic, vortex, ultrasonic, oval gear, or thermal mass type.
The instrument loop also shows the signal type such as 4-20 mA HART or pulse.
Without this drawing detail a supplier can quote the wrong meter and delay the whole project.
Common Flow Meter Drawing Symbols You Will See
Most plants follow ISA 5.1 or ISO 14617 symbols but many EPCs use their own legend.
In practice you will see a circle or a rounded rectangle for the instrument.
A Coriolis mass flow meter often appears as a small square or circle tagged with FT or FIC.
An electromagnetic flow meter symbol may sit on a straight pipe run with a grounding ring note.
A vortex meter drawing symbol often includes a bluff body mark on the line.
An oval gear meter symbol is common on fuel oil skids and batch transfer lines.
Reading Instrument Bubbles and Tag Numbers
The tag number above the bubble gives you the loop number and function.
For example 10-FT-201 means flow transmitter loop 201 in area 10.
FIC means flow indicating controller.
FE means flow element.
FT means flow transmitter.
Because the drawing symbol defines the meter type a wrong read means a wrong quote.
Most engineers skip this part and check only the symbol.
We have seen many customer sites in Vietnam and Indonesia where a missing tag detail caused the wrong flange rating or liner choice.
From Symbol to Spec: Data You Need for a Quote
Do not stop at the symbol.
Collect the fluid name, flow range, pressure in bar, temperature in °C, pipe size in DN, and signal requirement.
For wastewater plants a Silver Instruments electromagnetic flow meter often matches the P&ID mark for a DN50 to DN600 line.
For edible oil batching an oval gear flow meter for diesel or palm oil may fit the positive displacement symbol.
For gas mass flow a thermal mass flow meter with 4-20 mA HART output matches the FT bubble on the instrument loop.
Last year a paint manufacturer in Vietnam asked us for a Coriolis meter on a 0 to 300 kg/h solvent line at 4 bar and 35 °C.
When the
_600x400.jpg)
Silver Instruments Models for Common P&ID Marks
Silver Automation Instruments is a flow meter manufacturer and supplier.
We supply Coriolis, electromagnetic, ultrasonic, vortex, oval gear, and thermal mass flow meters.
Coriolis mass flow meters cover flows from 0.1 kg/h to 50000 kg/h for chemicals and fuels.
Electromagnetic flow meters handle water, wastewater, acids, and slurries from DN10 to DN600.
For a seawater flow meter for desalination plant use an electromagnetic meter with PTFE liner and titanium electrodes.
Ultrasonic flow meters cover larger lines and temporary measurement on pipes up to DN1200.
Vortex flow meters suit steam and compressed air loops with temperature up to 350 °C.
Oval gear flow meters handle diesel, palm oil, and lubricants from DN4 to DN80.
Thermal mass flow meters cover air and biogas lines up to DN200.
Pressure transmitters and paperless recorders complete the instrument loop.
FAQ
What does FT mean on a P&ID?
FT stands for flow transmitter.
It means the flow element sends a signal such as 4-20 mA HART to a PLC or control room.
Is a flow meter symbol the same on every drawing?
No.
Many plants follow ISA 5.1 but the exact symbol can vary by EPC, country, and project legend.
Always check the legend sheet first.
Can Silver Instruments match the flow meter symbol on my P&ID?
Yes.
Send us the P&ID segment and the tag number.
We check the function, line size, signal, and process data before we quote a model.
What process data do you need for a flow meter quote?
Send fluid, flow range, pressure in bar, temperature in °C, pipe size in DN, and signal type.
For conductive liquids also send the minimum conductivity in µS/cm.
Do you ship flow meters to Southeast Asia, Oceania, Latin America, Africa, and the Middle East?
Yes.
We supply end users and distributors in those regions.
Contact us by phone, WhatsApp, or WeChat for stock and delivery times.
Send Us Your Process Data for a Flow Meter Quote
If your P&ID shows a flow meter symbol and you need a firm quote, send us the following data.
Fluid name and flow range in kg/h or m3/h.
Pressure in bar and temperature in °C.
Pipe size in DN and flange rating.
Signal output such as 4-20 mA HART, pulse, or Modbus.
Hazardous area requirement such as ATEX Zone 1.
Send this data to Silver Automation Instruments.
Tel: +86-25-68650347
Whatsapp: +86-25-52155837
WeChat: +86 15365082610
Website: https://flow-meter.com.au