Current position > Product detail
『High viscosity turbine flowmeter』Related information(v cone flow meter|rotary gas meter|gallon meter|gear meter|metal tube rotameter|glass tube rotameter|nutating disk meter|transit time ultrasonic flow meter|wedge flow meter|pd meters|hydraulic flow meter|ultrasonic water flow meter|water flow meter|air flow meter|magnetic water flow meter|oxygen flow meter|gas flow meter|argon flow meter|air velocity meter|gasoline flow meter|fuel flow meter|ultrasonic water meter|digital water meter|nitrogen flow meter|solid flow meter|Oxygen tank flow meter|digital water flow meter|diesel fuel flow meter|steam flow meter|02 flow meter|compressed air flow meter|oil flow meter|liquid flow meter)
1. How to detect flow rate with a pump There are various methods for detecting flow rate with a pump, depending on factors such as the type of pump, application scenario, and required accuracy.
1. Electromagnetic flowmeter method 1 Principle: The electromagnetic flowmeter operates based on Faradays law of electromagnetic induction. When a conductive liquid flows in a magnetic field, an induced electromotive force is generated, and its magnitude is proportional to the liquid flow rate (i.e. flow rate). At the same time, attention should be paid to the cleanliness of the electrodes to avoid dirt affecting measurement accuracy.
2. Turbine flowmeter method 1 Principle: The fluid impacts the turbine to rotate, and the speed of the turbine is proportional to the fluid flow rate. By detecting the speed of the turbine to determine the flow rate
2. Application scenarios: commonly used to measure the flow rate of gases and low viscosity liquids, such as natural gas pipeline flow rate, fuel flow rate, etc.
3. Installation points: During installation, ensure that the fluid flow direction is parallel to the turbine shaft and avoid significant vibrations that affect the normal rotation of the turbine.
III. Volumetric flowmeter method 1 Principle: Calculate the flow rate by measuring the fixed volume of fluid filled in the instrument per unit time. Application scenario: Suitable for measuring the flow rate of high viscosity liquids, oils, etc., such as lubricating oil flow rate, crude oil flow rate, etc. Installation points: Ensure good sealing of the flowmeter during installation to prevent fluid leakage from affecting the measurement results.
4. Ultrasonic flowmeter method 1 Principle: When
2. Types of volumetric flow meters
The types of volumetric flow meters mainly include the following: The principle of volumetric flow meters is to determine the flow rate by measuring the volume of liquid or gas flowing through a pipeline or pipeline per unit time.
. Common types: elliptical gear flow meter, piston flowmeter, waist wheel flowmeter, etc. Features: Suitable for measuring high viscosity liquids, wide range, high measurement accuracy, and installation pipeline conditions have no impact on measurement accuracy. The principle of vortex flowmeter is to measure the flow rate by utilizing the pressure pulsation generated by the rotation of the vortex in the fluid. Features: Suitable for industrial applications with high flow rates, both gases and liquids can be measured, but the requirements for straight pipe sections are relatively high. Vortex flowmeter, due to its measurement principle, can provide stable measurement performance over a wide flow range. Principle of turbine flowmeter: Calculate flow rate by measuring the rotational speed of the turbine in the fluid. Features: It is commonly used for measuring liquids with lowe