Current position >About Us
1. The meaning of "water meter"
Water meter in English [ˈ w ɔの t ə (r) ˈ mi ∝ t ə (r)] and in the United States [ˈ w ɔの t ə r ˈ mi ∝ t ə r]; Water meter
2. Professional English translation is required between water meters. A water meter, also known as a water meter, is a device that measures the amount of water used. Commonly seen on the user end of tap water, its degree is used as the basis for calculating water bills. Water meters typically measure in cubic feet (ft ³) or cubic meters (m ³). So "water meter room" can be translated as: Water meter room or Room of Water metering. Water meter readings from right to left are 0.1 liters, 1 liter, 10 liters, 100 liters, 1 cubic meter (1000 liters), 10 cubic meters, 100 cubic meters, 1000 cubic meters. Types of displacement water meters, displacement water meters, velocity water meters, jet meters (single jet and multi jet), turbine meters, propeller meters, and MAG water meter mag meters. Composite water meters include electromagnetic meters, ultrasonic meters, and ultrasonic meters. 3. Is the meter displaying m in tons? The density of water is 1kg/m3, so water meter 1.2 displays the volume of water. According to the mass m, which is equal to the density multiplied by the volume, 37 cubic meters is 37kg, and 1 ton is equal to 1000kg, which is 0.037kg Water meter: A water meter, also known as a water meter, is a device that measures the amount of water used. Commonly seen on the user end of tap water, its degree is used as the basis for calculating water fees. Water meters typically measure in cubic feet (ft3) or cubic meters (m3). Installation:
1. The diameter of the water meter should be determined according to the diameter of the installation pipeline, and the installation position should avoid exposure to sunlight, flooding, freezing, and pollution, making it easy to disassemble and swipe the card.
2. The water meter should be installed horizontally (with the display facing upwards).
3. Before installation, the sand, gravel, hemp fibers, and other debris inside the pipeline should be removed to avoid causing water meter malfunction.
4. The direction of the arrow shown on the water meter should be consistent with the direction of water flow in the pipeline. 5. If the water meter is installed at the inlet of the boiler, it is necessary to prevent the backflow of hot water and steam from the boiler from damaging the internal components of the water meter. It is best to install a check valve at the outlet of the water meter. 6. According to the markings on the dial, leave enough straight pipe length before and after the water meter to ensure measurement accuracy. If U10D5 is marked, it is necessary to ensure that there is a straight pipe section of 10 times the diameter length at the front of the water meter and a straight pipe section of 5 times the diameter length behind the meter.